How It Work

Inmode’s effects are divided into three stages:

Stage One: Fat Reduction (SMAS Layer)

The most special thing about Inmode is that it directly removes fat cells. Using high-voltage electrical pulses (HVP) technology, strong energy of 2,000V is delivered in an instant. When this energy reaches the fat layer, it creates heat of 45-47°C and causes fat cells to die. This means you can fundamentally improve double chin or sagging cheeks. This is a big difference from other treatments.

Stage Two: Wrinkle Improvement and Lifting Effect (Dermis Layer)

Multi-polar RF energy is delivered to the skin surface and dermis layer. As this energy heats the skin surface to 43°C, it promotes the production of collagen, elastin, and hyaluronic acid in the dermis layer. When collagen increases, the skin recovers elasticity and wrinkles improve. At the same time, as the skin becomes tighter, a lifting effect appears.

Stage Three: Skin Tone Improvement (Epidermis Layer)

High energy is delivered evenly to the epidermis layer while minimizing irritation to the skin surface. It breaks down settled pigment and enlarged capillaries to improve skin texture and provide a tightening effect.

Main Effects of Inmode

Although it varies from person to person, you can generally expect the following effects:

Immediate Effects: Within one week after treatment, swelling decreases, facial contours become more defined, and skin elasticity slightly improves.

Lasting Effects: From 2-4 weeks after the procedure, collagen regeneration begins in earnest and more noticeable changes appear. Because the effects continue, it is best to evaluate the actual changes at least 2-4 weeks after treatment.

Main Improvements: Reduced double chin, defined face line, improved skin elasticity, reduced fine wrinkles, brighter skin tone, smaller pores, and more.

Who Should Get This Treatment?

Inmode is especially recommended for the following people:

People with a double chin: This is the area where Inmode shows its strongest effects. Since it directly removes fat cells, it is very effective.

People concerned about sagging cheeks: As people age, cheeks sag, and Inmode can provide significant improvement.

People with blurry facial contours: By tightening sagging skin, you can restore a V-line shape.

People who need both wrinkle reduction and improved elasticity: The biggest advantage of Inmode is that it can address fat reduction, collagen regeneration, and skin tone improvement all at once.

People who want overall skin improvement: This treatment offers good value for those who want both lifting and skin regeneration.

How Is the Procedure Done?

The procedure is simple. First, the skin is cleaned thoroughly and photos are taken before treatment. If needed, a local numbing cream is applied. Then a gel is applied to the skin and the machine’s head is placed against the skin to deliver energy. The treatment time varies depending on the area treated but usually takes 15-25 minutes. For the jawline and double chin area, special attention is paid to gather or pull the skin to increase the treatment effect.

Is There Pain?

Because Inmode uses heat energy, you may feel heat during the procedure. However, the level of pain varies greatly from person to person.

Inmode comes in two modes. The Inmode FX mode can feel somewhat bunched or pulled because of the suction pressure, and the heat sensation can be stronger. The Inmode Forma mode uses a higher frequency, so there is almost no pain and it is more comfortable.

If you are worried about pain, hospitals offer various methods such as numbing cream, nerve anesthesia, and pain management IV fluids, and many places can offer sleep anesthesia. Talk enough about pain during your consultation before the procedure.

How Many Sessions Do I Need?

To see the full effects of Inmode, usually 3-5 sessions are recommended. Although a single session shows some effect, it is better to have multiple sessions for maximum results.

Recommended Treatment Schedule: Receive 3 basic sessions at 2-week intervals, and proceed with additional sessions as needed. Because it takes time for fat cells to be completely removed, 2-week intervals are most effective.

1 Session: Skin elasticity improves slightly and the face line is gently defined.

3 Sessions: The double chin noticeably decreases and the contours are defined.

5+ Sessions: Fat reduction and skin elasticity are maximized.

How Long Do the Results Last?

Inmode’s results generally last 6 months to 1 year. There are differences depending on each person’s skin condition, lifestyle habits, age, and more. To maintain the results, it is good to have maintenance sessions (1-2 times) every 6 months to 1 year.

How Much Does It Cost?

The cost of Inmode treatment varies considerably depending on the hospital and the person. Generally, one session costs 60,000 to 150,000 won, and varies depending on the treatment area, the machine specifications, and the experience of the medical staff.

Looking at the total cost, based on the recommended 3-5 sessions, it is usually 200,000 to 750,000 won. Results are better when you receive treatment from experienced medical professionals at established medical facilities rather than at low-cost clinics.

Is There Downtime?

One of the big advantages of Inmode is that there is almost no downtime. You can apply makeup and resume daily activities right after the procedure.

However, pay attention to the following points:

Temporary Symptoms: Your skin may become slightly red right after treatment, and rarely, swelling or mild bruising may occur. This naturally goes away in about 3-7 days.

Daily Life Restrictions: For about 3-5 days after treatment, it is good to avoid activities that cause a lot of sweating, such as steam rooms, saunas, and intense exercise. Increased heat stimulus can increase side effects.

Are There Any Side Effects?

Although Inmode is a safe FDA-approved treatment, all procedures have the possibility of side effects.

Common Side Effects: Heat sensation during the procedure, temporary swelling and redness after the procedure, and dry skin are the most common.

Rare Side Effects: Excessive energy output or improper technique can cause burns or blistering. If you have metal implants in the area, there is a burn risk, so you must inform the medical staff.

Preventing Side Effects: Experienced medical professionals, appropriate energy settings, and correct technique greatly reduce side effects. Therefore, it is important to receive treatment at a trusted medical facility rather than a low-cost clinic.

Post-Treatment Care Tips

Post-treatment care is important to get 100% of the benefits from Inmode:

Drink Plenty of Water: Drink more than 8 glasses of water a day to help skin regeneration. Water is essential to recover from heat loss caused by treatment.

Sun Protection: For 2 weeks after treatment, avoid direct sunlight and apply sunscreen SPF 50 or higher thoroughly.

Moisturizing Care: After treatment, your skin may become temporarily dry, so adequate moisturizing is necessary. Using products like Cicapair cream or hydrating sheet masks is good.

Avoid Irritation: For 2 weeks after treatment, avoid peeling, products with strong chemical ingredients, and hot water.

Regular Lifestyle: Adequate sleep and stress management promote collagen regeneration.

Can I Get Other Treatments Together?

Inmode can show even better results when combined with other lifting treatments.

Together with Ultherapy: Ultherapy uses ultrasound to stimulate deeper fascial layers, while Inmode targets the dermis and fat layers. When done together, there is a synergistic effect.

Together with Sylfirm X: Sylfirm also uses ultrasound HIFU technology, and when combined with Inmode, it can stimulate multiple depths of skin layers for an even stronger lifting effect.

Compared to Thermage: Both use radiofrequency technology, but Inmode is especially strong for fat reduction and double chin improvement, while Thermage is stronger for overall lifting of a wider area.

Together with Rejuran Healer: When combined with collagen-promoting treatment, skin regeneration effects are maximized.

Final Tips for Beginners

These are things you must know before getting Inmode treatment:

Choose a Trustworthy Medical Facility: The experience of medical professionals and whether the equipment is authentic are more important than price. Carefully check reviews and treatment cases.

Have a Thorough Consultation: Before treatment, talk thoroughly with medical professionals about your skin condition, concerns, and expectations. The same Inmode treatment customized for each person is most effective.

Have Realistic Expectations: Rather than expecting dramatic changes from one session, think of it as a gradual improvement process through 3-5 sessions.

Take Photos for Each Session: Taking photos at the same angle for each session helps you clearly see changes, and helps medical professionals plan the next session.

Prepare in Advance: Keep your skin clean before treatment and avoid irritating skincare. On the day of treatment, get plenty of sleep and maintain good physical condition.